Denon AVR-X1000

155
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Information
Show information about receiver settings, input signals, etc.
2 Audio
Show the audio information for MAIN ZONE.
Sound Mode : The currently set sound mode.
Input Signal : The input signal type.
Format : The number of input signal channels (presence of front,
surround, LFE).
Sample Rate : The input signal’s sampling frequency.
Oset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround
back channel. “MATRIX” is displayed with Dolby Digital EX
and DTS-ES Matrix signals, “DISCRETE” with DTS-ES Discrete
signals.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.
It automatically corrects the standard signal level for individual
program sources.
The correction value can be checked using the STATUS on the main
unit.
Offset: - 4dB
The figure is the corrected value. This cannot be changed.
2 Video
Show the HDMI input/output signals and HDMI monitor information
for MAIN ZONE.
HDMI Signal
Resolution / Color Space / Pixel Depth
HDMI Monitor
Interface / Resolutions
2 ZONE
Show information about current settings.
MAIN ZONE : This item shows information about settings for MAIN
ZONE. The information displayed diers according to
the input source.
ZONE2 : This item shows information about settings for ZONE2.
2 Firmware
Version : Displays information for the current firmware.
2 Notifications
Selects notification message preferences.
Notif.Alerts
On (Default) : Displays notification messages from Denon in the popup
menu.
O : Does not display notification messages from Denon in the popup
menu.