Denon AVR-X1000

134
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Source Rename
Change the display name of the selected input source.
This is convenient when the input source name of your device and the
input source name of this unit are dierent. You can change the name to
suit your needs. When the renaming is completed, the name is displayed
on this unit’s display and on the menu screen.
CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / TV AUDIO :
Change the display name of the selected input source.
Set Defaults : The “Source Rename” settings are returned to the default
settings.
%
•Up to 12 characters can be input. For character input, see page119.
Hide Sources
Remove from the display input sources that are not used.
Show (Default) : Use this source.
Hide : Do not use this source.
Source Level
•This function corrects the playback level of the selected input source’s
audio input.
•Make this setting if there are dierences in the input volume levels
between the dierent sources.
–12dB – +12dB (Default : 0dB)