Denon AVR-X1000 User Manual

113
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Setting items Description Page
Tone Adjusts the tonal quality of the sound.
124
Tone Control Set the tone control function to “On” and “O”.
124
Bass Adjust bass.
124
Treble Adjust treble.
124
Restorer Expands the low and high frequency components of compressed audio content such as MP3 files to enable
richer audio playback.
124
Audio Delay Compensates for incorrect timing between video and audio.
125
Volume Set the MAIN ZONE (room where the unit is located) volume setting.
125
Scale Set how volume is displayed.
125
Limit Make a setting for maximum volume.
125
Power On Level Define the volume setting that is active when the power is turned on.
125
Mute Level Set the amount of attenuation when muting is on.
125
Audyssey Makes Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® settings.
126
MultEQ
®
XT MultEQ® XT compensates for both time and frequency characteristics of the listening area based on Audyssey®
Setup measurement results.
126
Dynamic EQ Solves the problem of deteriorating sound quality as volume is decreased by taking into account human
perception and room acoustics. Works with MultEQ® XT.
126
Ref.Lev.Oset Audyssey Dynamic EQ® is referenced to the standard film mix level.
127
Dynamic Volume Solves the problem of large variations in volume level between TV, movies and other content (between quiet
passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting.
127
Manual EQ Uses the graphic equalizer to adjust the tone of each speaker.
128
Speaker Select Select whether to adjust tones for individual speakers or for all speakers.
128
Adjust EQ Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Select”.
128
Curve Copy Copy “Audyssey Flat”curve from MultEQ® XT.
128

Denon AVR-X1000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	151 mm
Weight	8200 g