Name: Denon AVR-X1000
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

150

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Make settings for wired LAN.

•If you are using a broadband router (DHCP function), there is no need

to make the settings at “IP Address” and “Proxy”, since the DHCP

function is set to “On” in this unit’s default settings.

•Only set “Settings” when connecting to a network without a DHCP

function.

DHCP

Settings

-IP Address

-Subnet Mask

-Default Gateway

-Primary DNS

-Secondary DNS

Off

192.

168.

000.

001

255.

000

000.

000

000.

000

000.

000

Proxy

-Name

-Port

Off

00000

Save

Cancel

2 DHCP

Selects how to connect to the network.

On : Conﬁgure the network settings automatically from your router.

O : Conﬁgure the network settings manually.

2 IP Address

Set the IP address within the ranges shown below.

•The Network Audio function cannot be used if other IP addresses

are set.

CLASS A: 10.0.0.1 – 10.255.255.254

CLASS B: 172.16.0.1 – 172.31.255.254

CLASS C: 192.168.0.1 – 192.168.255.254

2 Subnet Mask

When connecting an xDSL modem or connector adapter directly to this

unit, input the subnet mask indicated in the documentation supplied by

your provider. Normally input 255.255.255.0.

2 Default Gateway

When connected to a gateway (router), input its IP address.

2 Primary DNS, Secondary DNS

If there is only one DNS address indicated in the documentation

supplied by your provider, input it at “Primary DNS”. If two or more

DNS are provided by your provider, enter both “Primary DNS” and

“Secondary DNS”.

Other manuals for Denon AVR-X1000

Manual Del Usuario10 pages

Getting Started10 pages

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X1000 and is the answer not in the manual?

Denon AVR-X1000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC