EasyManuals Logo

Denon AVR-X4300H User Manual

Denon AVR-X4300H
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #257 background imageLoading...
Page #257 background image
o
Add New Feature
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade Package: Display the items to be upgraded.
Upgrade Status:
Display a list of the additional functions
provided by the upgrade.
Upgrade:
Execute the upgrade process.
When the upgrade starts, the menu
screen is shut down. During the upgrade,
the amount of upgrade time which has
elapsed is displayed.
0
See the Denon website for details about upgrades.
0
When the procedure is complete, “Registered” is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, “Not
Registered” is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main unit’s
u and INFO for at least 3 seconds.
0
If the upgrade is not successful, an error message identical to those in
“Firmware” - “Update” will appear on the display. Check the settings and
network environment and then perform the upgrade again.
0
This menu cannot be selected when “Allow Update” is set to “Off”.
Notes concerning use of “Update” and “Add New Feature”
0
In order to use these functions, you must have the correct system
requirements and settings for an Internet connection. (v
p. 86)
0
Do not turn off the power until updating or upgrading is completed.
0
Approximately 1 hour is required for the updating/upgrading procedure
to be completed.
0
Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed. Furthermore,
there may be cases where backup data is reset for the parameters,
etc., set on this unit.
0
If the update or upgrade fails, press and hold the X on the main unit for
more than 5 seconds, or remove and re-insert the power cord. After
about 1 minute, “Please wait” appears on the display and update
restarts. If the error continues, check the network environment.
0
Information regarding the “Update” function and “Add New Feature” will be
announced on the Denon website each time related plans are defined.
Contents Connections Playback Settings Tips Appendix
257
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X4300H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4300H and is the answer not in the manual?

Denon AVR-X4300H Specifications

General IconGeneral
Display-
Product colorBlack
Audio decodersDTS Neo:X, DTS-HD Master Audio, Dolby Pro Logic IIz, Dolby Surround, Dolby TrueHD
Audio amplifierYes
Connector contacts platingGold
Apple docking compatibilityNot supported
Receiver typeSurround
Audio output channels11.2 channels
Power output per channel (1KHz@6 Ohm)235 W
Power output per channel (20-20KHz@8 Ohm)125 W
Audio formats supportedAAC, ALAC, DSD, FLAC, MP3, WAV, WMA
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Internet radio services supportedNapster, Pandora, SIRIUS Internet Radio, Spotify, TuneIn
HDMI in8
Remote (IR) input1
Composite video in4
Digital audio coaxial in2
Headphone connectivity3.5 mm
Number of HDMI outputs3
Multichannel audio output typeRCA
Supported video modes1080p, 2160p
Connectivity technologyWired & Wireless
Speakers connectivity type3.5mm
Power consumption (standby)0.1 W
Power consumption (typical)710 W
Card reader integratedNo
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height236 mm
Weight13500 g

Related product manuals