Denon AVR-X540BT User Manual

Sound modes and surround parameters
.
Sound mode
Surr.Parameter
Tone
Restorer
z3
Mode
Dynamic
Comp.
z1
Low
Frequency
z2
Subwoofer
Pro Logic g Music mode only
Neo:6 Music
mode only
Panorama Dimension Center Width Center Image
Direct (2-channel)
SSz4
Direct (Multi-channel)
SS
Stereo
SSS SS
Multi Ch In
S S
Dolby Pro Logic g SS SSS SS
DTS Neo:6
SS SSS
Dolby Digital
SS S
Dolby Digital Plus
SS S
Dolby TrueHD
SS
DTS Surround
SS S
DTS 96/24
SS S
DTS-HD
SS
DTS Express
SS S
Multi Ch Stereo
SS SS
Virtual
SS SS
z1
This item can be selected when Dolby Digital or DTS signal is played.
z2
This item can be selected when Dolby Digital or DTS signal or DVD-Audio is played.
z3
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z4 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 94)
Contents
Connections Playback Settings Tips Appendix
123
Front panel Display Rear panel Remote Index

Denon AVR-X540BT Specifications

General

Channels	5.2
HDMI Inputs	5
HDMI Outputs	1
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Auto Speaker Calibration	No
Number of Power Amps	5
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)	90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)	140 W
Composite In	2
Composite Out	1
Digital In: Optical	2
Analog In	2
Speaker Terminal: Screw	Yes
FM Tuner with RDS	Yes
3D Signal Pass-Through	Yes
Audio Return Channel	Yes
HDMI Standby Pass-Through	Yes
CEC	Yes
Auto Speaker Setup by Microphone	No
Dimensions (W x H x D)	434 x 151 x 319 mm
Weight	7.5 kg
Total Harmonic Distortion	0.08 %
Input Sensitivity/Impedance	200 mV / 47 kΩ
Signal-to-Noise Ratio	98 dB
Ethernet Port	No
Wi-Fi	No
Power Output per Channel	70W (8 ohms, 20Hz - 20kHz, 0.08% THD)
Frequency Response	10Hz - 100kHz
Supported Audio Formats	MP3, WMA, AAC