Denon AVR-X540BT User Manual

M
POWER button (X)
This turns the power on/off. (v p. 38)
N
ECO Mode button (G)
This switches to ECO Mode. (v
p. 95)
O
VOLUME buttons (df)
These adjust the volume level. (v
p. 39)
P
OPTION button
This displays the option menu on the TV screen.
Q
ENTER button
This determines the selection.
R
SETUP button
This displays the menu on the TV screen. (v
p. 73)
S
Preset memory button (MEMORY)
The current broadcast station that is preset. (v
p. 53)
T
Tuning mode select button (MODE)
This switches the tune mode. (v p. 48)
U
AUDIO DELAY buttons (+, –)
Compensates for incorrect timing between video and audio.
(v
p. 78)
Q3
Q5
Q4
Q8
Q9
W0
Q6
Q7
W1
Contents
Connections Playback Settings Tips Appendix
18
Front panel Display Rear panel Remote Index

Denon AVR-X540BT Specifications

General

Channels	5.2
HDMI Inputs	5
HDMI Outputs	1
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Auto Speaker Calibration	No
Number of Power Amps	5
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)	90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)	140 W
Composite In	2
Composite Out	1
Digital In: Optical	2
Analog In	2
Speaker Terminal: Screw	Yes
FM Tuner with RDS	Yes
3D Signal Pass-Through	Yes
Audio Return Channel	Yes
HDMI Standby Pass-Through	Yes
CEC	Yes
Auto Speaker Setup by Microphone	No
Dimensions (W x H x D)	434 x 151 x 319 mm
Weight	7.5 kg
Total Harmonic Distortion	0.08 %
Input Sensitivity/Impedance	200 mV / 47 kΩ
Signal-to-Noise Ratio	98 dB
Ethernet Port	No
Wi-Fi	No
Power Output per Channel	70W (8 ohms, 20Hz - 20kHz, 0.08% THD)
Frequency Response	10Hz - 100kHz
Supported Audio Formats	MP3, WMA, AAC