6
Packing the product (US and Canada only)
Once you received an empty box, follow the instructions below to pack the product. It will help
prevent damages during shipment.
2 Preparation
① Remove the left and right antennas
on the rear panel.
Keep the antennas at home and attach
them again to the product once the product
is returned after the upgrade.
NOTE
• If the product is packed with the antennas
attached, the antennas will be damaged.
• Also keep other accessories such as the
remote control unit at home. They do not need
to be shipped with the product.
② To protect the door during shipment,
insert the provided door cushion into
the door as shown in the diagram,
close the door, and then fix the door
in place with tape.
To tape up the door, use the blue tape affixed
to the provided product packing sheet.
1.SPK610-611_RMF_ENG_00A_210408.indd 61.SPK610-611_RMF_ENG_00A_210408.indd 6 2021/04/08 11:19:262021/04/08 11:19:26
To Next Page
Loading...
