EasyManuals Logo

Denon AVR-X8500H User Manual

Denon AVR-X8500H
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #293 background imageLoading...
Page #293 background image
Desired sound does not come out
The volume does not increase.
0
The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. (v p. 188)
0
Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit.
No sound comes out with the HDMI connection.
0
Check the connection of the HDMI connectors. (v
p. 83)
0
When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output from the TV, set “TV”. (v p. 196)
0
When using the HDMI Control function, check that the audio output is set to the AV amplifier on the TV. (v p. 160)
No sound comes out of a specific speaker.
0
Check that speaker cables are properly connected.
0
Check that a selection other than “None” is set for the “Speaker Config.” setting in menu. (v
p. 234)
0
Check the “Assign Mode” setting in the menu. (v
p. 224)
0
When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers and subwoofer.
No sound is produced from subwoofer.
0
Check the subwoofer connections.
0
Turn on the subwoofer’s power.
0
Set “Speaker Config.” - “Subwoofer” in the menu to “1 spkr” or “2 spkrs”. (v
p. 234)
0
When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the sound mode, no sound may be output from the
subwoofer. (v
p. 234)
0
When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the subwoofer. (v
p. 243)
0
You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”. (v
p. 243)
DTS sound is not output.
0
Check that the digital audio output setting on the connected device is set to “DTS”.
Contents Connections Playback Settings Tips Appendix
293
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X8500H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X8500H and is the answer not in the manual?

Denon AVR-X8500H Specifications

General IconGeneral
Channels13.2
Power Output150W per channel (8 ohms, 20Hz-20kHz, 0.05% THD)
Frequency Response10Hz-100kHz (+1, -3dB)
HDMI Inputs8 (1 front)
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
HEOS Multi-roomYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
Impedance4-16 ohms
HDR CompatibilityHDR10, Dolby Vision, HLG
Audio Return Channel (ARC)Yes
Digital Audio Inputs2 Optical, 2 Coaxial
Analog Audio Inputs6
Phono InputYes
Speaker ConnectorsBinding Posts
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Surround Sound SupportDolby Atmos, DTS:X, Auro-3D
TunerAM/FM
Input Sensitivity/Impedance200 mV / 47 kohms
HDCP Support2.2
Other ConnectionsUSB, Ethernet, RS-232C
Wireless ConnectivityWi-Fi, Bluetooth
Signal-to-Noise Ratio102 dB
DACAKM AK4490EQ (32-bit/192kHz)
Total Harmonic Distortion0.05% (20Hz - 20kHz, 150W)

Related product manuals