Denon AVR2310CIOM - Video Signal Output Relationships; Video Conversion Output Matrix; Video Signal Output Notes

3
ENGLISH
Getting Started Connections Playback Remote Control Troubleshooting SpecificationsMulti-ZoneSettings
Surround
Surround mode
Signals and adjustability in the different modes
Parameter (default values are shown in parentheses)
PRO LOGIC g/gx MUSIC mode only
NEO:6 MUSIC
mode only
EXT. IN only
Tone Control
(NOTE4)
MultEQ
Dynamic EQ
(NOTE5)
Dynamic
Volume
(NOTE6)
RESTORER
(NOTE7)
Panorama Dimension Center Width Center Image Subwoofer ATT
PURE DIRECT, DIRECT
A A A A A A A A A A
MULTI CH DIRECT
A A A A A A A A A A
STEREO
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S
EXT. IN
A A A A S A A A A A
MULTI CH IN
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
DOLBY PRO LOGIC gx S (OFF) S (3) S (3) A A S (0dB) S (OFF) S (OFF) S (OFF) S
DOLBY PRO LOGIC g S (OFF) S (3) S (3) A A S (0dB) S (OFF) S (OFF) S (OFF) S
DTS NEO:6
A A A S (0.3) A S (0dB) S (OFF) S (OFF) S (OFF) S
DOLBY PRO LOGIC gz A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
DOLBY DIGITAL
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
DOLBY DIGITAL Plus
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
DOLBY TrueHD
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
DTS SURROUND
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
DTS-96/24
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
DTS-HD
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) A
5CH/7CH STEREO
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S
ROCK ARENA
A A A A A S (NOTE3) S (OFF) S (OFF) S (OFF) S
JAZZ CLUB
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S
MONO MOVIE
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S
VIDEO GAME
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S
MATRIX
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S
VIRTUAL
A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S
S : Adjustable
A : Not adjustable
NOTE3 : BASS +6 dB, TREBLE +4 dB
NOTE4 : Cannot be set when the “Dynamic EQ” (
vpage 51) setting is “ON”.
NOTE5 : Cannot be set when the “MultEQ” (
vpage 50) setting is “OFF”.
NOTE6 : Cannot be set when the “Dynamic EQ” (
vpage 51) setting is “OFF”.
NOTE7 : “RESTORER” can be set for analog or PCM 48 kHz or 44.1 kHz input signals.
Information