Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
0
If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem.
Remove and re-insert the power cord of the unit.
If this unit does not operate properly, check the corresponding symptoms in this section.
If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power
immediately and contact the store where you purchased this unit.
o
Power does not turn on / Power is turned off
0
Confirm that the AC adapter is plugged into the outlet.
0
Check all connections to HDMI connectors.
0
Check whether the adapter plug for the AC adapter is attached correctly to the AC adapter.
0
Use the AC adapter supplied with this unit.
0
Confirm that the power is turned on for the source device connected to the selected HDMI input. The power for this unit is linked to the power of the
source device connected to the HDMI input connector, and automatically turns on or to standby.
Contents
Connections Operations Troubleshooting Appendix Specifications
20
Front panel Rear panel Side panel Remote
To Next Page