Pairing with the Pairing Mode
Pair a Bluetooth device with this unit.
1
Press SEARCH when the input source is “Bluetooth”.
The device will go into the pairing mode.
0
Either press and hold Bluetooth for 3 seconds, or switch the input
source to “Bluetooth” and then press and hold SOURCE on this
unit for more than 3 seconds to switch to pairing mode.
2
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
0
When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select “pair”
for both the Bluetooth device and the unit.
0
Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Contents Connections Playback
Settings
Tips Appendix
49
Front/Top
panel
Rear panel
Remote control unit
Index
To Next Page
Loading...
Need help?
General
