To Next PageTo Next Page
Need help?Do you have a question about the Denon AVR-1802 and is the answer not in the manual?
General| Speakers connectivity type | - |
|---|---|
| Receiver type | Surround |
| Frequency range | 10 - 100000 Hz |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.7 % |
| Power output per channel (1KHz@6 Ohm) | 115 W |
| Power output per channel (20-20KHz@8 Ohm) | 80 W |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Equalizer | Yes |
| Audio decoders | DTS, Dolby Digital, Dolby Pro Logic II |
| 3D | No |
| AM band range | 520 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| HDMI in | 0 |
| Composite video in | 5 |
| S-Video inputs quantity | 4 |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 3 |
Weight and Dimensions| Depth | 417 mm |
|---|---|
| Width | 434 mm |
| Height | 171 mm |
| Weight | 10900 g |
Checks for leakage current and line-to-chassis resistance to ensure safety.
Details on power amplifier rated output and output terminals.
Details on FM/AM receiving ranges, sensitivity, S/N ratio, and distortion.
Power supply, consumption, dimensions, and mass of the unit.
Instructions for removing the top cover, detailing screw removal.
Steps to remove the front panel, including screw identification.
Procedure for detaching the rear panel, involving cord bushing and screw removal.
Connection diagram for measuring instruments and FM alignment steps.
Table detailing FM alignment steps, parameters, and adjustments.
Table outlining AM alignment steps and required adjustments.
Information on CS493263-CL IC, including terminal functions.
Pinout and function description for the LC89055W IC, detailing its terminals.
Pinout and function description for the AK4527BVQ IC, detailing its terminals.
Information on DTA series transistors, including pinout and component values.
Information on DTC series transistors, including pinout and component values.
Details for the 2SK117 transistor, including pinout and type.
Details for 1N4007 and 1SS133 components.
Information on the KDS160 component.
Identification of the FL display model and its pin assignment.
Table detailing the pin numbers and their corresponding connections for the display.
Assignment details for anodes and grids, linking them to display segments.
Component layout diagram for the main printed wiring board assembly for specific regions.
Example of resistor notation explaining performance and tolerance coding.
Example capacitor notation explaining dielectric, capacity, and tolerance.
Explanation of resistor value notation and units.
Explanation of electrolyte capacitor notation and units.
Parts list for the main printed wiring board assembly, categorized by semiconductors and resistors.
