Denon AVR-1912 - User Manual

Other manuals for Denon AVR-1912

Service Manual156 pages

Specifications2 pages

Manual Del Usuario133 pages

User Manual16 pages

Getting Started16 pages

Antes De Empezar16 pages

Questions and Answers

N
nicolekramerAug 19, 2025
Why no sound is produced from subwoofer on Denon Receiver?
- B
  Bryan HunterAug 20, 2025
  If you're not getting any sound from the subwoofer connected to your Denon Receiver, check the subwoofer connections first. Then, ensure the subwoofer is powered on and that 'Speaker Config.' – 'Subwoofer' is set to 'Yes' in the menu. If 'Front' and 'Center' are set to 'Large' and 'Subwoofer Mode' is set to 'LFE', sound output may vary depending on the input signal or selected surround mode.
M
Melissa JonesAug 22, 2025
How to fix no audio output with HDMI connection on Denon AVR-1912 Receiver?
- T
  Thomas JonesAug 22, 2025
  If no audio is output with an HDMI connection on your Denon Receiver, first, check the connection of the HDMI connectors. If you intend to output HDMI audio from the speakers, ensure that 'HDMI Audio Out' in the menu is set to 'AMP'. Alternatively, if you want the audio to come from a TV, set 'HDMI Audio Out' to 'TV'.
J
Joe MillerAug 25, 2025
What to do if no video is output with HDMI connection on Denon Receiver?
- D
  Dwayne BatesAug 25, 2025
  If your Denon Receiver isn't producing video via HDMI, begin by verifying the HDMI cable connections. Next, make sure the input source is correctly set to match the HDMI connector you're using. Finally, confirm that your TV supports HDCP (High-bandwidth Digital Content Protection). If the connected device isn't HDCP-compatible, the video output may be incorrect.
X
xstanleyAug 26, 2025
How to troubleshoot audio not outputting on Denon AVR-1912?
- C
  Craig MunozAug 26, 2025
  If you're not getting any sound from your Denon Receiver, there are several things to check: 1. Verify all device connections. 2. Check the speaker connections and configurations. 3. Ensure the audio device is powered on. 4. Adjust the master volume. 5. Cancel mute mode. 6. Select the correct input source and mode. 7. Disconnect headphones, as this may disable speaker output.
J
Johnny ZunigaAug 27, 2025
Why is the power indicator blinking red on my Denon AVR-1912 Receiver every 2 seconds?
- J
  Jeffery ReedAug 27, 2025
  If the power indicator on your Denon Receiver is blinking red in intervals of approximately 2 seconds, it indicates that the unit's internal temperature has risen. Turn off the power and allow the unit to cool down sufficiently before reapplying power. Also, ensure the unit is installed in a location with good ventilation.
B
Bradley WilliamsAug 29, 2025
How to turn on display on Denon Receiver?
- A
  Adam WatersAug 29, 2025
  If your Denon Receiver's display is off, go to the menu and adjust the 'Dimmer' setting to something other than 'OFF'.
L
Lauren CarrSep 1, 2025
What to do if Denon AVR-1912 does not operate properly?
- B
  Brian WestSep 1, 2025
  If your Denon Receiver isn't operating correctly, try resetting the microprocessor.
D
Dr. Audrey WoodSep 2, 2025
Why is internet radio not playing on my Denon AVR-1912 Receiver?
- J
  Jeremy RamirezSep 3, 2025
  If your Denon Receiver isn't playing Internet radio, check the following: 1. Ensure the Ethernet cable is properly connected and your network is active. 2. Confirm the program format is compatible (MP3 or WMA). 3. Check your router's firewall settings. 4. Verify the radio station is currently broadcasting. 5. Check the receiver's IP address.
M
michelle80Sep 4, 2025
Why Dolby PLg or DTS NEO:6 mode cannot be selected on Denon Receiver?
- A
  Audrey RodriguezSep 5, 2025
  If you can't select Dolby PLg mode or DTS NEO:6 mode on your Denon Receiver, verify that 'Speaker Config.' – 'Center' or 'Surround' is set to something other than 'None'. Also, note that these modes cannot be selected when headphones are in use.
P
patrick01Sep 7, 2025
How to fix no sound from surround back speaker on Denon AVR-1912 Receiver?
- D
  Dana AtkinsonSep 7, 2025
  If no sound is coming from the surround back speakers on your Denon Receiver, check that 'Amp Assign' is correctly configured to output audio to these speakers. Also, ensure 'Speaker Config.' – 'S.Back' is set to something other than 'None', 'Surr.Parameter' – 'S.Back' is not set to 'OFF', and the surround mode is not set to 'STEREO' or 'VIRTUAL'.

Summary

Safety Precautions and Instructions

Electric Shock and Fire Hazard Warnings

Warnings regarding electric shock, opening the unit, and exposure to hazards.

Important Safety and FCC Compliance Information

General safety guidelines, FCC compliance, and product modification notices.

Operational Notes and Installation Cautions

Installation and Ventilation Guidelines

Advice on proper installation for heat dispersal and ventilation.

Handling and Care Precautions

Basic Version Operation Guide

Connecting Audio-Visual Devices

Video Signal Conversion for Monitor Output

Explains the unit's video conversion capabilities for outputting signals to a monitor.

HDMI Connectivity and Functions

Supported HDMI Features and Formats

Details HDMI functions like 3D, ARC, CEC, and audio/video formats.

HDMI Device Connections

Home Network (LAN) Connection

System Setup and Configuration

Automatic Speaker Calibration (Audyssey Auto Setup)

Guide to setting up speakers automatically for optimal audio performance.

Network Configuration (Network Setup)

Steps for connecting the unit to a home network for streaming services.

Microphone Placement for Calibration

Instructions on where to position the microphone for accurate speaker setup.

Audyssey Auto Setup - Preparation

Subwoofer Configuration Steps

Specific settings for subwoofers based on their mode and capabilities.

Audyssey Auto Setup - Measurement Steps

Step 2: Detecting and Measuring Speakers

The unit automatically detects speaker configuration, level, and distance.

Audyssey Auto Setup - Measurement and Calculation

Multi-Position Measurement Process

Measures sound at multiple locations for accurate acoustic correction.

Result Analysis and Frequency Response Calculation

The system analyzes data to determine speaker frequency response.

Audyssey Auto Setup - Finalizing

Audyssey Auto Setup - Troubleshooting

Understanding Error Messages

Explains common error messages and their corresponding causes and solutions.

System Setup and Network Configuration

Network Setup Procedure

Steps for connecting to a home network and performing automatic setup.

Basic Playback Operations

Input Source Selection Methods

How to select the desired audio/video input source for playback.

Volume Control and Disc Playback

Blu-ray;DVD and CD Player Playback Procedures

Procedures for preparing and playing discs from Blu-ray, DVD, and CD players.

iPod Playback Options

iPod Content Playback and Operation

Direct iPod USB Connection

Connecting iPod Directly to USB Port

Guide to connecting an iPod directly to the unit's USB port for audio playback.

Network Audio Playback Features

Internet Radio Functionality Details

Details on receiving, presetting, and managing Internet radio stations.

Media Player and File Playback Options

How to play music, image files, and use album art and slideshows.

Radio Tuning and Presets

FM;AM Radio Tuning Methods

Explains auto tuning, manual tuning, and continuous frequency adjustment.

Manual Radio Station Presetting Guide

Steps for presetting favorite radio stations for easy access.

Radio Tuning Operations

Direct Frequency Radio Tuning

Process for tuning radio stations by directly inputting frequencies.

Managing Internet Radio Favorites

Adding Favorite Internet Radio Stations

Procedure for registering currently playing stations as favorites.

Accessing Favorite Radio Stations

How to select and play stations from the favorites list.

Internet Radio Playback

Step-by-Step Internet Radio Listening Guide

Comprehensive instructions for preparing and listening to Internet radio.

Flickr Photo Viewing

Accessing Flickr Photos (All or Specific Users)

Instructions for viewing photos on Flickr, either by user or all content.

Pandora Music Streaming

Pandora Account Setup and Listening Guide

Steps for setting up a Pandora account and streaming music.

Custom Radio Station Creation and Playback

Creating Personalized Radio Stations

Guide to creating custom radio stations by track or artist selection.

Playing and Exploring Created Radio Stations

How to play custom stations and discover similar music streams.

USB Memory Device Playback

USB Memory Device Operation

Surround Sound Mode Selection

Detailed Explanation of Listening Modes

Dolby Listening Modes Explained

Descriptions of Dolby Digital, Dolby Digital EX, Dolby TrueHD, and Dolby Pro Logic modes.

DTS Listening Modes Explained

Descriptions of DTS surround modes, including DTS-HD and DTS Express.

Specialized Listening Modes

Direct and Pure Direct Audio Modes

Details modes that bypass sound processing for pure audio playback.

Input Signal and Surround Mode Compatibility

Input Signal to Surround Mode Mapping

A comprehensive table showing which surround modes work with which input signals.

Input Signal to Surround Mode Mapping Table

A comprehensive table showing which surround modes work with which input signals.

Advanced Operations Guide

Advanced Speaker Installation and Connection

Procedures for advanced speaker setup beyond basic 5.1 channels.

Advanced Playback and Zone 2 Functions

Covers advanced playback features and multi-room audio setup.

Detailed System Settings and Remote Control Operation

Guides on making detailed settings and operating connected devices remotely.

Advanced Speaker Installation

Front Height Speaker Installation Details

Explains the installation of front height speakers for enhanced surround sound.

7.1 Channel Speaker Placement Guide

Visual guide for speaker positioning in a 7.1 channel setup with front height speakers.

Speaker Placement Configurations

7.1 Channel Surround Back Speaker Setup

Diagram for speaker placement in a 7.1 channel system with surround back speakers.

6.1 Channel Surround Back Speaker Setup

Diagram for speaker placement in a 6.1 channel system with a single surround back speaker.

Speaker Connection Procedures

7.1 Channel Surround Back Speaker Connection

Illustrates the wiring for 7.1 channel playback with surround back speakers.

Advanced Speaker Connections

7.1 Channel Front Height Speaker Connection

Wiring diagram for 7.1 channel systems utilizing front height speakers.

Bi-Amp Connection for Enhanced Audio

Bi-Amp Speaker Wiring Guide

Guide to bi-amp connections for improved tweeter and woofer sound quality.

Speaker Setup Configuration

Amplifier Assignment and Speaker Configuration

Settings for Amp Assign, Speaker Config (Front, Center, Subwoofer, Surround, S.Back).

Speaker Size and Surround Back Settings

Amplifier Assignment Configuration (Amp Assign)

Setting up amplifier assignments for different speaker configurations.

Speaker Configuration and Channel Selection

Selecting Speaker Configuration Options

Channel Selection for Measurement Setup

Setting channel selection to measure or skip specific speakers.

Advanced Playback Features

HDMI Control Functionality Details

How to link device operations using HDMI control for convenience.

Speaker Volume and Fader Adjustments

Individual Speaker Level Adjustment

Quick Select Functionality

AirPlay Wireless Music Streaming

AirPlay Setup and Music Streaming Guide

Instructions for setting up AirPlay and streaming music from iTunes or Apple devices.

Party Mode for Multi-Room Audio

Initiating and Participating in Party Mode

Guide to starting and joining party mode sessions for synchronized audio.

Managing and Canceling Party Mode Sessions

Zone Management and Device Control

Media Controller Operation

Playing Computer Media via Controller

Guide to playing music and image files from a computer using a media controller.

Controlling Playback via Media Controller

Web Control Functionality

Accessing the Unit via Web Browser

Steps to enable web control, find the IP address, and access the interface.

Memory Functions

Personal Memory Plus Function Details

ZONE2 (Separate Room) Playback

Quick Select and Sleep Timer Functions

Saving, Recalling, and Naming Quick Select Settings

Memorizing, recalling, and naming custom setting configurations.

Audio Adjustment Menu

Adjustable Audio Parameters List

Surround Parameter Adjustments

Advanced Audio Parameter Adjustments

Tone and Audyssey Settings

Tone Control for Bass and Treble Adjustment

Audyssey Settings Configuration Guide

Setting Audyssey parameters like MultEQ, Dynamic EQ, and Dynamic Volume.

Manual Equalizer and Default Settings

Graphic Equalizer (Manual EQ) Configuration

Adjusting speaker tone using a graphic equalizer with various bands and levels.

Audio Enhancements: RESTORER and Audio Delay

RESTORER Function for Compressed Audio

System Setup Menu Overview

Speaker and HDMI Configuration Settings

Settings for speaker setup, HDMI output, and audio configurations.

Network, Zone2, and Other System Settings

Network setup, ZONE2 configuration, language, and other system options.

Speaker Setup Details

Speaker Configuration and Bass Settings

Setting Speaker Distances from Listening Position

Channel Level, Crossover, and Front Speaker Setup

Channel Level and Test Tone Adjustment

Crossover Frequency and Front Speaker Configuration

Setting subwoofer crossover frequency and front speaker usage for surround modes.

HDMI Setup and Control

HDMI Output and Sync Settings

Configuring HDMI output, Auto Lip Sync, and HDMI audio output.

HDMI Control Functionality

Linking device operations and managing power standby via HDMI control.

Audio and EQ Setup Options

2-Channel Audio Setup Options

Auto Surround and EQ Customization

Network Setup (Wired LAN)

Wired LAN Connection Configuration

ZONE2 Setup and Other System Options

Multi-Zone (ZONE2) Audio Configuration

Detailed settings for ZONE2 audio playback, including levels and volume limits.

Radio Preset Management

Automatic Radio Station Presetting

Input Assignment Configuration

Assigning HDMI Input Connectors to Sources

How to change HDMI input connector assignments for input sources.

Assigning Digital Input Connectors to Sources

Video and Component Input Setup

Video Source Selection and Mode Settings

Selecting video sources and configuring video processing modes.

Component Video Input Assignment

Input Mode (Audio) and Rename

Audio Input Mode Settings

Setting audio input modes (Auto, HDMI, Digital, Analog) for different sources.

Operating Connected Devices Remotely

Registering Preset Codes for Remote Control

Registering Preset Codes via Remote Setup Guide

Steps to search and register preset codes for controlling other devices.

Specifying Zone and Resetting Remote Control

Specifying Zone for Remote Control Operation

Remote Control Unit Overview

Remote Control Unit Battery Insertion

Inserting Batteries and Handling Precautions

Troubleshooting Common Issues

General Operation and Power Issues

Troubleshooting for power not turning on, display off, and blinking indicator lights.

HDMI Connection Troubleshooting

Solutions for no audio or video output with HDMI connections.

Audio and Radio Troubleshooting

Audio Output and Surround Sound Issues

Troubleshooting for no audio output, surround sound, or subwoofer issues.

Radio Reception and iPod Playback Issues

Network and Remote Control Troubleshooting

USB and Network Connection Issues

Troubleshooting for USB device recognition, file playback, and network connectivity.

Pandora Login and Radio Station Connection Issues

Resetting the Microprocessor

Microprocessor Reset Procedure

Steps to reset the microprocessor to default settings for abnormal operations.

Specifications

Audio Section Specifications

Details on power amplifier output, input sensitivity, and frequency response.

Video Section and Tuner Section Specifications

Denon AVR-1912 Specifications

General

Impedance	47 Ω
Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	90 W
HDMI in	6
Composite video in	3
Component video (YPbPr/YCbCr) in	1
Headphone connectivity	6.3 mm
Connectivity technology	Wired
Speakers connectivity type	Banana connector/Binding posts
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
Ethernet LAN	Yes
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL
Display	-
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD
Apple docking compatibility	iPhone, iPod
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	460 W