Denon AVR-1912 User Manual

109
Display
u yioQ0Q1Q2Q3Q4
wq e r t
q Decoder indicators
These light when the respective decoders are operating.
w Input signal indicators
e Information display
The input source name, surround mode, setting values and other
information are displayed here.
r Front speaker indicator
This lights according to the setting of the front A and B speakers.
t Multi-zone indicators
This lights up when ZONE2 (separate room) power is turned on
(vpage68).
y Master volume indicator
u Sleep timer indicator
This lights when the sleep mode is selected (vpage59, 69).
i MUTE indicator
This lights when the mute mode is selected (vpage21).
o Audyssey
®
indicators
Light up as follows, depending on the setting of “MultEQ
®
”
(vpage 78), “Dynamic EQ
®
” (vpage 79) and “Dynamic
Volume
®
” (vpage79).
When “MultEQ
®
”, “Dynamic EQ
®
” and “Dynamic
Volume
®
” are “ON”.
When “MultEQ
®
” and “Dynamic EQ
®
” are “ON”
and “Dynamic Volume
®
” is “OFF”.
When “MultEQ
®
” is “ON” and “Dynamic EQ
®
” and
“Dynamic Volume
®
” are “OFF”.
Q0 Surround back indicator
This lights when audio signals are being output from the surround
back speakers (vpage83).
Q1 Input mode indicators
Set the audio input modes for the different input sources
(vpage99).
Q2 RESTORER indicator
This lights when the RESTORER mode is selected (vpage80).
Q3 HDMI indicator
This lights when playing using HDMI connections.
Q4 Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to “TUNER”.
STEREO : In the FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
Basic version
Advanced version
InformationInformation

Denon AVR-1912 Specifications

General

Impedance	47 Ω
Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	90 W
HDMI in	6
Composite video in	3
Component video (YPbPr/YCbCr) in	1
Headphone connectivity	6.3 mm
Connectivity technology	Wired
Speakers connectivity type	Banana connector/Binding posts
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
Ethernet LAN	Yes
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL
Display	-
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD
Apple docking compatibility	iPhone, iPod
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	460 W

Weight and Dimensions

Depth	382 mm
Width	435 mm
Height	167 mm
Weight	10200 g