How to enable sound from front height speaker on Denon Receiver?
If you're not getting any sound from the front height speakers on your Denon Receiver, ensure that 'Surr.Parameter' – 'PLgz Height' is set to 'ON'. Also, check if 'Amp Assign' is correctly configured to output audio to the front height speakers and that 'Speaker Config.' – 'F.Height' is set to something other than 'None'.
How to troubleshoot iPod not playing on Denon AVR-1912?
If your Denon Receiver is not playing iPod content, check the iPod connections, ensure the iPod control dock's AC adapter is plugged into the power outlet, and switch the input source to 'DOCK'.
What to do if Denon AVR-1912 Receiver reception fails?
To resolve reception issues, noise, or distortion on your Denon Receiver, try the following: 1. Adjust the antenna orientation or position. 2. Separate the AM loop antenna from the unit. 3. Use an FM outdoor antenna. 4. Keep the antenna separate from other connection cables.
Why Dynamic EQ and Dynamic Volume cannot be selected on Denon Receiver?
If you cannot select Dynamic EQ® and Dynamic Volume® on your Denon Receiver, perform Audyssey® Auto Setup.
How to enable DTS sound on Denon AVR-1912 Receiver?
To enable DTS sound output on your Denon Receiver, set 'Decode Mode' in the menu to either 'Auto' or 'DTS'.
General| Impedance | 47 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 10 - 100000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 7.1 channels |
| Audio A/D Converter (ADC) | 24-bit/96kHz |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 125 W |
| Power output per channel (20-20KHz@8 Ohm) | 90 W |
| HDMI in | 6 |
| Composite video in | 3 |
| Component video (YPbPr/YCbCr) in | 1 |
| Headphone connectivity | 6.3 mm |
| Connectivity technology | Wired |
| Speakers connectivity type | Banana connector/Binding posts |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Image formats supported | JPG |
| Wi-Fi | No |
| Ethernet LAN | Yes |
| AM band range | 520 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 56 |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD |
| Apple docking compatibility | iPhone, iPod |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 460 W |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 435 mm |
| Height | 167 mm |
| Weight | 10200 g |
Warnings regarding electric shock, opening the unit, and exposure to hazards.
General safety guidelines, FCC compliance, and product modification notices.
Advice on proper installation for heat dispersal and ventilation.
Explains the unit's video conversion capabilities for outputting signals to a monitor.
Details HDMI functions like 3D, ARC, CEC, and audio/video formats.
Guide to setting up speakers automatically for optimal audio performance.
Steps for connecting the unit to a home network for streaming services.
Instructions on where to position the microphone for accurate speaker setup.
Specific settings for subwoofers based on their mode and capabilities.
The unit automatically detects speaker configuration, level, and distance.
Measures sound at multiple locations for accurate acoustic correction.
The system analyzes data to determine speaker frequency response.
Explains common error messages and their corresponding causes and solutions.
Steps for connecting to a home network and performing automatic setup.
How to select the desired audio/video input source for playback.
Procedures for preparing and playing discs from Blu-ray, DVD, and CD players.
Guide to connecting an iPod directly to the unit's USB port for audio playback.
Details on receiving, presetting, and managing Internet radio stations.
How to play music, image files, and use album art and slideshows.
Explains auto tuning, manual tuning, and continuous frequency adjustment.
Steps for presetting favorite radio stations for easy access.
Process for tuning radio stations by directly inputting frequencies.
Procedure for registering currently playing stations as favorites.
How to select and play stations from the favorites list.
Comprehensive instructions for preparing and listening to Internet radio.
Instructions for viewing photos on Flickr, either by user or all content.
Steps for setting up a Pandora account and streaming music.
Guide to creating custom radio stations by track or artist selection.
How to play custom stations and discover similar music streams.
Descriptions of Dolby Digital, Dolby Digital EX, Dolby TrueHD, and Dolby Pro Logic modes.
Descriptions of DTS surround modes, including DTS-HD and DTS Express.
Details modes that bypass sound processing for pure audio playback.
A comprehensive table showing which surround modes work with which input signals.
A comprehensive table showing which surround modes work with which input signals.
Procedures for advanced speaker setup beyond basic 5.1 channels.
Covers advanced playback features and multi-room audio setup.
Guides on making detailed settings and operating connected devices remotely.
Explains the installation of front height speakers for enhanced surround sound.
Visual guide for speaker positioning in a 7.1 channel setup with front height speakers.
Diagram for speaker placement in a 7.1 channel system with surround back speakers.
Diagram for speaker placement in a 6.1 channel system with a single surround back speaker.
Illustrates the wiring for 7.1 channel playback with surround back speakers.
Wiring diagram for 7.1 channel systems utilizing front height speakers.
Guide to bi-amp connections for improved tweeter and woofer sound quality.
Settings for Amp Assign, Speaker Config (Front, Center, Subwoofer, Surround, S.Back).
Setting up amplifier assignments for different speaker configurations.
Setting channel selection to measure or skip specific speakers.
How to link device operations using HDMI control for convenience.
Instructions for setting up AirPlay and streaming music from iTunes or Apple devices.
Guide to starting and joining party mode sessions for synchronized audio.
Guide to playing music and image files from a computer using a media controller.
Steps to enable web control, find the IP address, and access the interface.
Memorizing, recalling, and naming custom setting configurations.
Setting Audyssey parameters like MultEQ, Dynamic EQ, and Dynamic Volume.
Adjusting speaker tone using a graphic equalizer with various bands and levels.
Settings for speaker setup, HDMI output, and audio configurations.
Network setup, ZONE2 configuration, language, and other system options.
Setting subwoofer crossover frequency and front speaker usage for surround modes.
Configuring HDMI output, Auto Lip Sync, and HDMI audio output.
Linking device operations and managing power standby via HDMI control.
Detailed settings for ZONE2 audio playback, including levels and volume limits.
How to change HDMI input connector assignments for input sources.
Selecting video sources and configuring video processing modes.
Setting audio input modes (Auto, HDMI, Digital, Analog) for different sources.
Steps to search and register preset codes for controlling other devices.
Troubleshooting for power not turning on, display off, and blinking indicator lights.
Solutions for no audio or video output with HDMI connections.
Troubleshooting for no audio output, surround sound, or subwoofer issues.
Troubleshooting for USB device recognition, file playback, and network connectivity.
Steps to reset the microprocessor to default settings for abnormal operations.
Details on power amplifier output, input sensitivity, and frequency response.
To Next Page
