4
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.0.2”, enter
“http://192.168.0.2”.
.
A
Entering the IP address.
B
If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
By adding this unit’s IP address to the browser’s bookmark, you can display
the web control screen using the bookmark function the next time you use the
browser. If you are using a DHCP server and “Network Control” (v
p. 79)
is set to “Off”, turning the power on/off changes the IP address.
5
When the top menu is displayed, click on the menu
item you want to operate.
.
C
Click when you setup network settings. (vGExample 1H)
D
Click when you update firmware.
Contents Connections Playback
Settings
Tips Appendix
60
Front/Top
panel
Rear panel
Remote control unit
Index
To Next Page
Loading...
Need help?
General
