Speaker Optimization
An optimizing filter suited for the properties of the speakers (SC-N4) can
be used.
On (Default):
The response is optimized for the speakers (SC-N4, sold
separately).
Off: The response is flat.
Language
Set the language for display on the menu.
English / Deutsch / Française / Italiano / Nederlands / Español /
Svenska / Русский
/ Polski (Default : English)
Auto-Standby
When “Auto-Standby” is set to “On”, and no operations are made in the
stopped state for the set amount of time, this unit automatically enters
standby mode.
For the input source “Remote iPod” only, when no operation is performed
for eight hours, this unit automatically enters the standby mode.
1min / 5min /
15min
(Default)
/
Other:
When “Other” is selected, the “Auto-Standby” time can
be set within the range of 1 - 99 minutes. Select the
value using ui and then press ENTER to enter the
setting value.
Off: The unit does not go into standby automatically.
Usage Data
For product improvement purposes, please send information on the
device settings and operating conditions of the functions to Denon.
Information provided by customers will be used as reference material for
product development purposes in the future.
Denon will never provide any information we collect to third parties.
Yes: Provide information on the operating status of this unit.
No: Do not provide information on the operating status of this unit.
Contents Connections Playback
Settings
Tips Appendix
76
Front/Top
panel
Rear panel
Remote control unit
Index
To Next Page
Loading...
Need help?
General
