I want to turn the display off
0
Press the DIMMER button to turn the display off. (v p. 78)
I want to display the clock constantly
0
The clock can be constantly displayed by setting “Clock Mode” to “On”. (v p. 93)
I want to make the volume of the headphones the same as that of the speakers
0
You can increase the sound from the headphones at the same volume setting by changing the “H/P Amplifier Gain” settings. (v p. 88)
Simple operations in the power off state
0
When an input source select button, 1/3 button and QUICK SELECT buttons on the remote control, as well as 5 button, QUICK SELECT keys and
1/3/ENTER key on the main unit is pressed, the operation is performed at the same time as the unit switches on.
0
When the “Network Control” function is set to “On”, you can perform playback, or other operations through AirPlay or HEOS app. (v p. 98)
I want the volume not to become too loud by mistake
0
Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
(v p. 87)
Contents
Connections Playback Settings Tips Appendix
102
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
