Quick select function
Settings such as the input source, volume level and “SDB/Tone” in the
setup menu can be registered to the QUICK SELECT 1 - 3 buttons.
You can simply press one of the registered QUICK SELECT buttons in
subsequent playbacks to switch to the group of saved settings in a batch.
By saving frequently used settings at the QUICK SELECT 1 – 3 buttons,
you will always be able to easily call up the same playback environment.
o
Calling up the settings
1
Press QUICK SELECT.
The quick select settings registered to the button you pressed are
called up.
0
The default settings for the input source are as shown below.
Button Input source
QUICK SELECT 1 Internet Radio
QUICK SELECT 2 Tuner
QUICK SELECT 3 Bluetooth
0
Volume is not registered to quick select in the factory default settings.
See “Changing the settings” to register volume to quick select. (v p. 80)
o
Changing the settings
1
Set the items below to the settings you want to
register.
A
Input source (v p. 32)
B
Volume (v p. 32)
C
“SDB/Tone” in the setup menu (v p. 87)
0
Press and hold QUICK SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0
Tuner / Internet Radio Station / Spotify
2
Press and hold the desired QUICK SELECT for more
than 3 seconds.
“Saved” appears on the display and the current settings will be
memorized.
Contents
Connections Playback Settings Tips Appendix
80
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
