CD Auto Play
When the disc tray is closed, the unit can detect the CD, automatically
switch the input source to “CD” and start playback.
On
(Default):
Performs automatic playback.
Off: Does not perform automatic playback.
Language
Sets the language for display the menu.
English / Français / Español (Default : English)
Auto-Standby
Sets the amount of time that must elapse without unit operation or an input
signal before the unit goes into standby automatically.
Off
(Default):
The unit does not go into standby
automatically.
1min: The unit goes into standby after 1 minutes.
5min: The unit goes into standby after 5 minutes.
15min: The unit goes into standby after 15 minutes.
Other:
Sets the minutes (between 1 and 99) before
the unit automatically goes into standby.
After setting the amount of time with 0 – 9,
+10 buttons, press ENTER to confirm the
setting.
Contents
Connections Playback Settings Tips Appendix
94
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
