DAB
Making the DAB settings.
Tuning Aid
The reception intensity of the currently tuned in frequency is displayed.
Use this if your preferred station cannot be received.
Reception intensity
Limit line
1
Use u and i to select a frequency to tune into. It takes
around 4-5 seconds to correctly display the reception
intensity (C) after selecting a frequency.
2
If necessary, adjust the position of the antenna so that
the reception intensity (C) passes to the right of the
limit line (D). The station can now be received.
3
Press ENTER to select the station and exit “Tuning
Aid”.
Station Order
The service list is created with the auto scan function.
Alphanumeric
(Default):
In alphabetical order.
Multiplex: In order of frequency.
DRC (Dynamic Range Control)
Compress dynamic range (difference between loud and soft sounds).
Off / 1/2 / 1 (Default : 1)
DAB Initialize
When the “DAB Initialize” procedure is performed, all the preset memory
settings for the stations and DABs are reset.
DAB Version
The DAB module’s version is displayed.
Contents
Connections Playback Settings Tips Appendix
103
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
Need help?
General
