Turning the power on
1
Press POWER X to turn on power to the unit.
You can also switch the power to standby by pressing X on the main unit.
Selecting the input source
1
Press the input source select button to be played back.
The desired input source can be selected directly.
0
Press TUNER again to switch between FM/AM.
0
Press DIGITAL IN again to switch between Digital In 1/2.
0
You can also select the input source by pressing SOURCE on the main unit.
Contents
Connections Playback
Settings
Tips Appendix
31
Front/Top
panel
Rear panel
Remote control unit
Index