Denon D-T1

Operation buttons Function
1/3
Playback / Pause
2
Stop
8 9
Skip to previous track / Skip to next track
NOTE
0
To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0
The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0
Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
Pairing with other Bluetooth devices
Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your mobile device.
2
Press MODE.
The Bluetooth menu is displayed on the display.
3
Use ui to select “PAIRING”, then press ENTER.
The Bluetooth indicator blinks and the device will go into the pairing
mode.
4
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
The Bluetooth indicator lights when pairing is complete.
0
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0
Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Contents
Connections Playback Settings Tips Appendix
35
Front panel Rear panel
Remote control
unit
Index