Denon DHT-T100 User Manual

14
E
N
G
L
I
S
H
Connecting DHT-T100 to your television
DHT-T100 offers three audio inputs to route sound from your television to the DHT-T100.
Connect only one type of audio cable at a time.
1 BEST Optical Digital Input (S/PDIF) —Connects to television’s optical digital out.
or
2 BETTER Coaxial Digital In (RCA jack)—Connects to television’s coaxial digital-audio.
or
3 GOOD Analog In 3.5mm mini plug stereo—Connects to television’s rear panel audio out or headphone
output if no digital out available.
Which of the three inputs will be selected is determined by auto-priority. If only one input has signal present, that input will
play, but if more than one are active Optical takes priority over Coaxial or Analog, and Coaxial over Analog.
Optical Digital In – BEST
Use the supplied optical cable to connect your television’s optical digital output to DHT-T100’s Optical Digital Input. Other
components connected to the television, such as a DVD/Blu-ray player or cable/satellite tuner, will automatically play through
DHT-T100.
The optical connector looks square, but it is “keyed” and will only plug in one way; don’t force it.
AC IN
DENON
DHT-T100
1
2
3
DIGITAL AUDIO
OPTICAL OUT
Television rear panel DHT-T100 rear panel
DENON
DHT-T100
DHT-T100E2_10A_131201.indd 14 2013/12/02 13:28:05

Denon DHT-T100 Specifications

General

Product color	Black
Recommended usage	Other
Equalizer	No
Audio decoders	Dolby Digital
RMS rated power	- W
Frequency range	- Hz
Impedance	- Ω
Connectivity technology	Wired & Wireless
Digital audio coaxial in	1