Denon DN-F400

17
4.CONTROL FEATURES
Table of Status Request and Status information codes
When a Status Request Command from the host is received by the DN-F400, the DN-F400 sends the Status Information to the host.
When the DN-F400 changes status, the DN-F400 automatically sends Status Information to the host.
Mode Request Code Status Answer Code
Card @0?CD +CR Card No Card @0CDNC+CR
Card In @0CDCI+CR
Unformat @0CDUF+CR
Write Protect @0CDWP+CR
Status @0?ST+CR STOP STOP @OSTST+CR
PLAY/STOP @0STTS+CR
PLAY PLAY @0STPL+CR
PLAYPAUSE @0STPP+CR
REPEAT PLAY PAUSE @0STRP+CR
FF @0STFF+CR
RWD @0STRW+CR
OTHER Operation Error @0STER+CR
Busy @0STBY+CR
Total Track Number @0?TT+CR Total Track Number XXX @0TTNNN+CR
Track Number @0?TR+CR Track Number XXX @0TRnnn+CR
Elapse Time @0?ET+CR Elapse Time hhhmmss @0EThhhmmss+CR
Remain Time @0?RM+CR Remain Time hhhmmss @0RMhhhmmss+CR
Play Track Algo/File CH
@0?ch+CR
CH STEREO @0chST+CR
MONO @0chMO+CR
Algo
@0?af+CR
Algo
PCM, bit lengthxx
@0afPMxx+CR
MP3, bit rate xxx(kbps) @0afM3xxx+CR ( VBR:“VBR”)
Play Track Algo/File FS @0?fs+CR FS XX @0fsXX+CR ( 48k:“48” 44.1k:“44”)
Artist @0?at+CR Artist XXXXXX @0atXXXXXX+CR
Title @0?ti+CR Title XXXXXX @0tiXXXXXX+CR
Album @0?al+CR Album XXXXXX @0alXXXXXX+CR
File Name nnn:Track No @0?Tnnnn+CR File Name XXXXXX @0Tnxxxxxx+CR
Fils Size nnn:Track No @0?Tsnnn+CR Fils Size XXXXXX @0Tsxxxxxx+CR
Hot Start Set
nn:Hot Start No @0?HSnn+CR Hot Start Set nn @0HSNNnnnHHHMMSSmm+CR
NN: Hot Start No.
nnn: Track No
HHH MM SS mm
hours min. sec. msec