To Next PageTo Next PageWhy is there no sound or distorted sound from my Denon DN-T645?
If there is no sound or the sound is distorted on your Denon Cassette Player, check that the output cord is properly connected. Also, make sure that the amplifier is adjusted correctly.
What to do if the sound is warbled or distorted on my Denon DN-T645 Cassette Player?
If the sound from your Denon Cassette Player is warbled or distorted, it could be due to several reasons. The heads, capstan, or pinch roller might be dirty and need cleaning. Alternatively, the tape could be wound too tight, in which case you should fast forward or rewind it to loosen the winding. Also, check if the recording input level is too high and adjust it accordingly. Finally, the tape may be worn out and have dropouts, requiring a replacement.
Why is there excessive noise coming from my Denon Cassette Player?
Excessive noise from your Denon Cassette Player can be caused by several factors. The tape may be worn and need replacement. The heads, capstan, or pinch roller could be dirty, requiring cleaning. The heads might be magnetized, in which case they should be demagnetized. Additionally, the recording input level might be too low, so try adjusting it.
What to do if the tape does not run on my Denon DN-T645?
If the tape does not run in your Denon Cassette Player, first check if the power cord is disconnected and ensure it's properly connected. Also, check if the tape is loose and tighten it with a pencil or similar object. Make sure the cassette is loaded properly. Finally, the cassette itself may be defective, and you might need to replace it.
Why is my Denon DN-T645 Cassette Player not recording when I press the record button?
If the tape is not recording when you press the record/record mute button on your Denon Cassette Player, make sure a cassette is loaded. Also, check if the erase prevention tabs are broken off; if they are, cover the holes with adhesive tape.
Why is the treble lost on my Denon DN-T645?
If the high frequency range (treble) is lost on your Denon Cassette Player, the heads might be dirty, so clean them. Alternatively, the tape could be worn, and you should replace it.
Why is the treble emphasized on my Denon DN-T645?
If the high frequency range (treble) is emphasized on your Denon Cassette Player, the DOLBY NR switch is set improperly. Set the DOLBY NR switch properly.
Why is programmed playback not working on my Denon DN-T645?
If programmed playback does not work on your Denon Cassette Player, it means the programmed playback operation has been performed improperly. Restart programmed playback.
What to do if the cassette tape cannot be removed from my Denon DN-T645 Cassette Player?
To remove the cassette tape from your Denon Cassette Player, turn the power operation switch ON again, and then press the stop button. Now, press the eject button to remove the cassette tape.
General| Brand | Denon |
|---|---|
| Model | DN-T645 |
| Category | Cassette Player |
| Language | English |
