Music files on PC or Mac cannot be played back (USB-DAC)
This unit is not recognized on the computer.
0
Reconnect the USB cable to the USB port on your computer. When this unit is still not recognized after reconnection, connect to a different USB port.
(v p. 25)
0
Restart your computer.
0
Check the OS of your computer. (v p. 48)
0
When your computer is running on Windows, a dedicated driver software should be installed. (v p. 49)
This unit is not selected as the playback device.
0
Select this unit as the playback device in the sound settings on the computer. (v p. 48)
“Signal Unlock” is displayed.
0
When digital audio signals cannot be detected properly, “Signal Unlock” is displayed. (v p. 56)
“Unsupported” is displayed.
0
“Unsupported” is displayed when audio signals that are not supported by this unit are input. Check the settings on your computer or player software.
(v p. 56)
0
If the computer you use is macOS, please check if the DNP-2000NE format is set below 384.0 kHz using the Audio MIDI Setup. (v p. 55)
Contents
Connections Playback Settings Tips Appendix
118
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
