Why is there no sound produced by my Denon DP-500M?
If no sound comes from your Denon Turntable, check these things: * Make sure the cartridge and head shell are properly connected. * Confirm the output cords are correctly connected to the amplifier. * Ensure the amplifier's settings are correct.
How to fix the stylus when it does not lower onto record on my Denon DP-500M?
To solve the issue of the stylus not lowering onto the record on your Denon Turntable, verify if the stylus pressure is properly adjusted and if the arm’s horizontal balance is properly adjusted.
Why is there a booming sound coming from my Denon DP-500M?
If you hear a booming sound from your Denon Turntable, check: * If the ground wire on the output cord is connected to the amplifier. * That the output cord's plugs are securely connected. * If the head shell's lock nut is securely tightened.
How to adjust sound if it's too weak or strong on Denon DP-500M?
If the sound from your Denon Turntable is too weak or too strong, verify that the amplifier's connection selector is set to the correct setting for the type of cartridge being used.
What to do if the stylus skips on my Denon DP-500M Turntable?
If the stylus on your Denon Turntable is skipping, check if the stylus pressure is properly adjusted. Also, inspect the record for warps or scratches, and ensure the stylus is free of dust.
Why is a booming sound heard from my Denon DP-500M Turntable?
If you are experiencing a booming sound with your Denon Turntable, check that the ground wire on the output cord is connected to the amplifier and that the output cord’s plugs are securely connected. Also, verify that the head shell’s lock nut is securely tightened.
What to do if the arm stops halfway across the record on my Denon Turntable?
If the arm of your Denon Turntable stops halfway across the record, check if the record is scratched or if the arm is hitting any object. If the counterweight touches the inside of the dust cover when playing the inner area of the record, remove the dust cover.
Why is no sound produced from my Denon DP-500M?
To troubleshoot the lack of sound from your Denon Turntable, verify that the cartridge and head shell are properly connected. Also, ensure that the output cords are correctly connected to the amplifier, and that the amplifier’s adjustments and settings are correct.
How to fix a Denon DP-500M Turntable when the stylus does not lower onto the record?
To address the issue of the stylus not lowering onto the record on your Denon Turntable, ensure that the stylus pressure and the arm’s horizontal balance are properly adjusted.
General| Drive System | Direct Drive |
|---|---|
| Speeds | 33 1/3, 45 RPM |
| Power Consumption | 10 W |
| Cartridge | Not included |
| Platter | Aluminum |
| Overhang | 15 mm |
| Signal to Noise Ratio | 70 dB |
| Power Supply | AC 100 V, 50/60 Hz |
| Frequency Response | 20Hz ~ 20kHz |
To Next Page
