Denon DVD-1600 User Manual (English)

Other manuals for Denon DVD-1600

Operating Instructions140 pages

Specification2 pages

Questions and Answers:

C
Charles Zimmerman DVMAug 16, 2025
Why is the picture distorted on my Denon DVD-1600 DVD Player?
- S
  Steven SanchezAug 16, 2025
  If the picture from your Denon DVD Player is distorted, or there's no picture, or the picture quality is poor, ensure that all equipment is connected properly and that your television is turned on and set to the correct video input. Check that the unit is connected directly to the television and not through a video cassette recorder. Adjust the “TV Aspect” setting in the Video menu to match your television. Also, check the settings in the GUI screen’s video menu. Note that some distortion is normal during SEARCH. If the unit and television are using different video systems, use a multi-system or PAL television.
J
jeffreyobrienAug 19, 2025
What to do if my Denon DVD-1600 DVD Player is not responding to remote or button presses?
- C
  cwatsonAug 19, 2025
  If your Denon DVD Player isn't responding when buttons are pressed, first ensure the batteries in the remote are correctly installed and not depleted; replace them if necessary. Point the remote control directly at the remote control sensor. Reset the unit by switching it to standby mode and then back on, or disconnect the AC mains lead and reconnect it. If condensation has formed, wait 1 to 2 hours for it to evaporate. If the unit is outputting bitstream signals, initialize the unit by pressing and holding [:] and [;] on the unit and then also pressing and holding [
J
Jacob ClarkAug 23, 2025
How to fix a Denon DVD-1600 that won't power on?
- K
  Kayla MartinezAug 25, 2025
  If your Denon DVD Player has no power or switches to standby mode automatically, ensure the AC mains lead is securely inserted into the household mains socket. To conserve power, the unit automatically switches to standby after approximately 30 minutes in stop mode. Turn the power back to ON.
J
Jason KelleyAug 27, 2025
What does 'Error' mean on my Denon DVD-1600 DVD Player and how can I fix it?
- M
  mtranAug 27, 2025
  If “ERROR” appears on your Denon DVD Player's display, reset the unit by pressing [POWER] to switch it to standby mode and then back to ON. Alternatively, press [POWER] to switch the unit to the standby mode, disconnect the AC mains lead, and then reconnect it.
R
ryan10Aug 31, 2025
Why does my Denon DVD-1600 say 'No Disc'?
- W
  wlopezAug 31, 2025
  If “NO DISC” appears on your Denon DVD Player's display, make sure you have inserted a disc correctly.
S
Steven OrtegaSep 3, 2025
What does 'Check the Disc' mean on my Denon DVD-1600 DVD Player?
- M
  Matthew HenrySep 3, 2025
  If “CHECK THE DISC” appears on your Denon DVD Player's display, it indicates that the disc is dirty. Wipe the disc clean.
D
Dana MartinSep 7, 2025
Why does my Denon DVD-1600 DVD Player say 'No Play'?
- M
  Matthew DavisSep 7, 2025
  If “NO PLAY” appears on your Denon DVD Player's display, it means you've inserted a disc the unit cannot play; insert one it can.

Denon DVD-1600 Specifications

General

Progressive Scan	Yes
Dolby Digital Decoding	Yes
DTS Decoding	Yes
Video Output	Composite, S-Video, Component
Remote Control	Yes
Weight	8.2 lbs
Disc Formats	CD, CD-R/RW, DVD-Video
Video Formats Supported	MPEG2
Audio D/A Converter	24-bit
Audio Output	Analog (stereo), Digital Coaxial, Digital Optical
Outputs	Composite video, S-Video, Component video, Analog audio (L/R), Coaxial digital audio, Optical digital audio
Dimensions (W x H x D)	434 x 81 x 307 mm