Erstelldatum 29.08.2008 14:45:00
Seite 1 von 3
DVD-2500BT
BEFORE APPLYING THE UPDATE PLEASE ENSURE YOU HAVE READ AND
FULLY UNDERSTAND THESE INSTRUCTIONS.
Reproduction, publication in electrical or any other from of this software and its documentation
without the express written consent of the rightful owner is forbidden and will be prosecuted by law.
© 2008 DENON UK
Warnung:
Warning:
Please read though these instructions completely before attempting to update your player. The use of this update is
completely at the owner’s risk. DENON can not be held accountable for damage resulting to the player or
associated equipment as a result of improper use of this update.
During the upgrade process it is imperative that you do not switch off the unit's power and/or press any of the
buttons on the unit or remote control unless otherwise instructed.
Nr. Description Note
1.
If you have not done so already, please connect
the DVD-2500BT to a monitor using the HDMI
connections (Page 10 of the user manual
2.
Turn on the player and monitor.
3.
Please ensure that you do not have any discs
currently inside the player and the draw is
closed.
4.
To put the BD player into version up mode,
press quickly
on enclosed RC-1091 following
buttons on the remote control unit in that order:
[9], [8],[7],[6] und [POP UP MENU/ MENU]
5.
The tray will open automatically.
6. Following message appears on the screen Æ
To Next Page
Need help?
General
