Why angle does not switch on Denon DBP-2010 Blu-ray Player?
The angle cannot be switched on your Denon Blu-ray Player for BD/DVD discs that do not contain multiple angles. In some cases, multiple angles are only recorded for specific scenes.
Why is there no sound or picture on my Denon DBP-2010 Blu-ray Player?
If you're not getting any sound or picture from your Denon Blu-ray Player, here are a few things to check: * Ensure the connected display device is turned on. * Verify the HDMI connection and related indications. * Inspect the RCA audio/video cable connections. * Confirm that Pure Direct mode is not set to “VideoOff” or “All Off”; if it is, set it to “Disp.Off” or “Normal.” * Check if your display device supports HDCP, as the unit requires it for video output. * Ensure the unit's HDMI output format matches the input format supported by the connected device. * If “HDMI Deep Color” is set to “Auto,” try setting it to “Off.”
What to do if my Denon DBP-2010 buttons do not work?
If the buttons on your Denon Blu-ray Player aren't working or the unit stops responding, try this: Unplug the AC cord from the AC outlet for 5-10 seconds to completely reset the unit.
How to fix no power on Denon Blu-ray Player?
If your Denon Blu-ray Player has no power, check the following: * Make sure the AC cord is properly connected. * Unplug the AC cord, wait 5-10 seconds, and then plug it back in.
What to do if my Denon DBP-2010 disc cannot be played back?
If your Denon Blu-ray Player won't play a disc, try the following: * Clean the disc. * Make sure the disc label is facing up. * Try another disc to check if the disc is defective. * Cancel the ratings control or change the control level. * Ensure you are inserting a disc that can be played back on this unit.
What to do if the playback of BD-Video or download of data does not perform properly on Denon Blu-ray Player?
If the playback of BD-Video or download of data does not perform properly on your Denon Blu-ray Player: * Check if an SD card is correctly inserted. * Do not remove the card during playback as some BD-Videos require an SD card during playback.
How to use BD-Live function on Denon DBP-2010?
To use the BD-Live function on your Denon Blu-ray Player: * Use an SD card with enough space. * Remove the write protection from the SD card.
What to do if my Denon DBP-2010 SD Memory Card cannot be read?
If your Denon Blu-ray Player cannot read the SD Memory Card, it is because the format of the card does not match this unit or the card is not compatible.
What to do if Denon Blu-ray Player playback does not start when the title is selected?
If playback doesn't start when the title is selected on your Denon Blu-ray Player, check the “Ratings” setting.
Why is my Denon Blu-ray Player picture distorted?
A small amount of picture distortion may sometimes appear, which is not a malfunction. Also, connect your Denon Blu-ray Player directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
Lists essential safety guidelines to prevent hazards.
Provides guidance on proper placement, ventilation, and handling to ensure safe operation.
Guides on connecting for multi-channel audio and video playback via various interfaces.
Guides for establishing digital video and multi-channel audio connections using HDMI cables.
Details how to configure HDMI output for video resolution and signal formats.
Explains how to set audio formats for HDMI connections based on connected devices.
Basic playback controls for starting, stopping, pausing, and resuming media.
Advanced playback controls for navigating and controlling playback speed and sequence.
Explains how to access and navigate the main setup menu for system configuration.
Allows fine-tuning of picture quality and adjustment of display settings like brightness.
Manages network settings, connection tests, proxy, DNS, and BD-Live access for internet connectivity.
General| HDMI | Yes |
|---|---|
| Weight | 4800 g |
| HDMI version | 1.3a |
| Playback formats | AVCHD, DivX |
| Dimensions (WxDxH) | 435 x 309.3 x 106 mm |
| Composite video out | 1 |
| Disc types supported | BD-R, BD-RE, CD, CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Dynamic range (1kHz) | 100 dB |
| Audio formats supported | MP3, WMA |
| Image formats supported | JPG |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 30 W |
| Signal-to-Noise Ratio (SNR) | 115 dB |
| Audio output channels | 7.1 channels |
| Total Harmonic Distortion (THD) | 0.004 % |
| Networking features | Ethernet |
To Next Page
