16
ENGLISH
ENGLISH
Introduction Connections Playback Function Setup Others
Playback
Press [POWER ON] or <ON/STANDBY> to turn on the unit.
The power indicator lights green.
䡵 Turning the unit to the standby mode
Press [POWER OFF] or <ON/STANDBY> to turn the unit to the
standby mode.
The power indicator lights red.
Disc playback
SD Card playback
䡵 Direct Playback (BD/DVD-Video/AVCHD) : page 16
䡵 Playing Back a VR mode DVD-RW/-R : page 17
䡵 Playing Back an Audio CD or a Disc with
DivX®/MP3/Windows Media™ Audio/JPEG
File : page 25
䡵 Kodak Picture CD : page 27
NOTE
• may appear at the top-right on the screen when the
operation is prohibited by the disc or this unit.
• During the playback of 2-layered disc, pictures may stop
for a moment. This happens when the 1st layer switches
to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back with disc
menu. Refer to the manual accompanying the disc for
details.
䡵 Reading the SD Memory Card : page 27
Operations Using Disc Menu, Title Menu,
and Popup Menu : page 17
ON / STANDBY
SD CARD
AC
<ON/STANDBY>
B
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Turning the Power On
Note
• Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when travelling, unplug the AC
cord from the AC outlet.
A
C
B
[ENTER]
[POWER OFF]
[U / V / Y / Z]
[POWER ON]
Direct Playback
1
Turn on the power of this unit. (Refer to “Turning
the Power On” on this page.)
2
Turn on the display device and select the
appropriate input on the device to which the unit
is connected.
3
Press A to open the disc tray.
4
Place the disc on the disc tray with its label side
facing up.
5
Press A to close the disc tray.
Some discs may start playback automatically.
6
Press B to start playback.
Menu screen may appear.
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].
7
Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 17.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning the unit to the standby mode.
DVD-V
DVD-VR
AVCHD
BD-V
Align the disc to the
disc tray guide.
It may take a while to load
the disc.
To Next Page
Loading...
Need help?
General
