EN
FR
ES
6
6
Listen to computer audio via
USB-DAC
Install the driver.
q Select the language to use for the installation.
w Click “OK”.
e The wizard menu is displayed. Follow the instructions
on the screen.
r When the wizard is completed, click “Yes”.
q
w
Please see the FAQ at www.denon.com if you
experience any issues getting audio to play from your
computer through the PMA-1700NE. You may also want
to check the support pages for audio player application.
r
NOTE
3
Install the Windows driver software
Windows OS
System requirements : Windows 10 or Windows 11
Download the dedicated driver from the “Download”
section of the PMA-1700NE page of the Denon
website (www.denon.com) onto your PC.
Unzip the downloaded fi le, and double-click the exe fi le.
The installation of the driver software is not necessary in the following cases.
• When you do not play back the music from a PC using USB-DAC of this unit.
• When using a macOS.
The driver software cannot be installed correctly if your PC is connected
to the unit by a USB cable. If the unit and your computer are connected
by a USB cable and the computer is switched on before installation,
disconnect the USB and restart the computer.
NOTE
1
1
2
1.PMA-1700NEE3_QSG_ENG_00A_220203.indd 61.PMA-1700NEE3_QSG_ENG_00A_220203.indd 6 2022/02/16 11:43:512022/02/16 11:43:51
To Next Page
Loading...
