EN
FR
ES
8
e Check that there is a checkmark next to “Default Device” under
in “PMA-1700NE” of the “Playback” tab.
• When there is a checkmark for a different device, click
“PMA-1700NE” and “Set Default”.
r Select “PMA-1700NE” and click “Properties”.
• The PMA-1700NE properties window is displayed.
PMA-1700NE
r
t
i
y
u
t Click the “Advanced” tab.
y Select the sampling rate and bit rate to be applied to the D/A
converter.
• It is recommended that “2 channel, 32 bit, 192000 Hz (Studio
Quality)” is selected.
u Click “Apply”.
i Click “Test”.
• Check that audio from this unit is output from the PC.
1.PMA-1700NEE3_QSG_ENG_00A_220203.indd 81.PMA-1700NEE3_QSG_ENG_00A_220203.indd 8 2022/02/16 11:43:512022/02/16 11:43:51
To Next Page
Loading...
