Denon PMA-1700NE - Setting the auto standby mode

Setting the auto standby mode
You can set the unit to automatically switch to standby mode if the unit is
not operated for 15 minutes when there is no audio input (Auto standby
mode).
Auto standby mode is set to on by default.
AMP POWER
X
1
Press and hold AMP POWER X for 5 seconds or more
to switch it on and off.
The display changes as follows each time it is switched on and off.
0
When auto standby mode is on: “AutoStby On” is displayed.
0
When auto standby mode is off: “AutoStby Off” is displayed.
Contents
Connections Playback Settings Tips Appendix
43
Front panel Rear panel
Remote control
unit
Index