Denon PMA-60 - Page 35

6
Press X.
0
When the unit power is turned on, the PC automatically finds and
connects to the unit.
7
Press q to switch the input source to “USB-DAC”.
8
Checking the installed driver.
A
Click the “Start” button and click “Control Panel” on the PC.
0
The control panel setting list is displayed.
B
Click the “Sound” icon.
0
The sound menu window is displayed.
C
Check that there is a checkmark next to “Default Device” under in
“PMA-60” of the “Playback” tab.
0
When there is a checkmark for a different device, click
“PMA-60” and “Set Default”.
9
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A
Select “PMA-60” and click “Properties”.
0
The PMA-60 Properties window is displayed.
.
PMA-60
q
Contents
Connections Playback Settings Tips Appendix
35
Front panel Display Rear panel Remote Index