Denon PMA-600NE - Selecting the input source; Adjusting the volume; Turning off the sound temporarily (Muting); Adjusting the tone

Selecting the input source
1
Press the input source select button to be played back.
The indicator of the selected input source lights.
0
You can also select the input source by turning INPUT SELECTOR on the main
unit.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
0
You can also adjust the volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE :.
The power indicator flashes green.
0
To cancel mute, press MUTE : again.
Adjusting the tone
1
Press SOURCE DIRECT on the main unit to turn off
source direct mode.
The SOURCE DIRECT indicator turns off.
2
Turn the BASS, TREBLE and BALANCE knobs to adjust
the tone.
Contents Connections Playback Settings Tips Appendix
25
Front panel Rear panel
Remote control
unit
Index