Denon PMA-600NE - Play music using any app on your Bluetooth device; Pairing with other Bluetooth devices

4
Play music using any app on your Bluetooth device.
0
The next time the input source is switched to “BLUETOOTH”, this
unit automatically connects to the last Bluetooth device that was
connected.
0
When this unit’s name is not displayed in the screen on the Bluetooth device,
search for devices on the Bluetooth device.
0
Enter “0000” when the password is requested on the screen of the Bluetooth
device.
0
The pairing mode on this unit lasts for approx. 5 minutes. When the pairing mode
on this unit is canceled before the pairing is completed, retry from step 1.
0
This unit cannot perform pairing against a Bluetooth device with a pass key other
than “0000”.
o
Pairing with other Bluetooth devices
Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your Bluetooth
device.
2
Press and hold the input source switching button
(Bluetooth) for at least 3 seconds.
The device will go into the pairing mode.
0
You can also switch to pairing mode by pressing and holding
BLUETOOTH PAIRING on this unit for at least 3 seconds.
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
When pairing is completed, the DIGITAL IN/BLUETOOTH indicator
is lit in blue.
0
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0
Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Contents
Connections Playback Settings Tips Appendix
29
Front panel Rear panel
Remote control
unit
Index