Audio from digital devices cannot be played back (Coaxial/Optical)
The DIGITAL IN/BLUETOOTH indicator is off.
0
When digital audio signals cannot be detected properly, the DIGITAL IN/BLUETOOTH indicator is off. (v p. 30)
The DIGITAL IN/BLUETOOTH indicator is blinking in green.
0
The DIGITAL IN/BLUETOOTH indicator blinks in green when audio signals that are not supported by this unit are input. Check the audio output signal
format from your digital device. (v p. 30)
0
Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.
Contents Connections Playback Settings Tips Appendix
42
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
