Denon PMA-800NE - Setting the Auto Standby mode; Turning Auto Standby mode on; Turning Auto Standby mode off

Setting the Auto Standby mode
You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input (Auto Standby
mode).
Auto Standby mode is set to off by default.
.
AMP POWER
X
Turning Auto Standby mode on
1
Press and hold AMP POWER X for more than 5
seconds to turn the Auto Standby mode on.
The power indicator flashes green three times.
Turning Auto Standby mode off
1
Press and hold AMP POWER X for more than 5
seconds to turn the Auto Standby mode off.
The power indicator flashes green once.
Contents Connections Playback Settings Tips Appendix
31
Front panel Rear panel
Remote control
unit
Index