Need help?Do you have a question about the Denon PMA-800NE and is the answer not in the manual?
General| Purpose | Home |
|---|---|
| Product color | Black |
| Bass adjustment | Yes |
| Channels quantity | 2 channels |
| Remote control type | RC-1223 |
| Connectivity technology | Wired |
| Amplifier class | A/B |
| Audio output channels | - channels |
| Peak power per channel | 85 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.01 % |
| RMS power output per channel (8 Ohm) | 50 W |
| Built-in display | No |
| Audio (L/R) in | 4 |
| Audio (L/R) out | 1 |
| Digital audio optical in | 3 |
| Speakers connectivity type | - |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 200 W |
| Certification | CE |
Weight and Dimensions| Depth | 307 mm |
|---|---|
| Width | 434 mm |
| Height | 122 mm |
| Weight | 750 g |
Identifies and explains the controls and indicators on the front panel.
Explains how to operate the main unit using the remote control.
Provides instructions on how to properly connect speaker cables.
Details connecting one or two sets of speakers to the respective terminals.
Instructions for connecting the power cord to a wall outlet.
Explains how to turn the unit on and switch it to standby mode.
Solutions for issues related to the unit not powering on or turning off automatically.
Troubleshooting steps for remote control operational problems.
Addresses issues with no sound or specific speakers not producing sound.
Solutions for distorted sound or humming noises during playback.
Troubleshooting for digital audio input issues, including indicator status.
To Next Page
