Need help?Do you have a question about the Denon POA-1500 and is the answer not in the manual?
General| Input Sensitivity | 1V |
|---|---|
| Speaker Load Impedance | 4 - 16 ohms |
| Total Harmonic Distortion | 0.003% |
| Damping Factor | 100 |
| Power Output | 150W + 150W (8 ohms, 20Hz - 20kHz, THD 0.003%) |
| Dimensions | 434 x 160 x 435 mm |
Detailed technical specifications for the power amplifier section.
Specifies the operation characteristics of the peak level meter.
Information about the speaker output terminals and their compatibility.
Describes the self-diagnostic capabilities of the unit.
Covers power source, consumption, dimensions, and weight.
Identifies and explains components on the front panel.
Identifies and explains components on the back panel.
Important safety and operational guidelines before making connections.
A simplified schematic showing the internal signal flow and components.
A step-by-step guide to diagnose and resolve common performance issues.
Procedure for setting the correct idling current for optimal performance.
Procedure to set the DC offset to the neutral point.
Steps to calibrate the peak level meters for accurate readings.
Procedure for minimizing distortion levels.
Lists integrated circuits used in the unit with their diagrams.
Lists transistors and FETs with their pinouts.
Lists diodes and LEDs with their types and visual representation.
Detailed parts list for the control and power supply unit (ETC0627D).
Detailed parts list for the power amplifier and power source unit.
List of all parts shown in the exploded view diagram.
To Next Page
