o
LED is flashing
Symptom Cause / Solution Page
Flashing red. (Flashes at
0.25 second intervals)
0
The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center. －
Flashing red. (Flashes at
0.5 second intervals)
0
Protection circuit activated due to a rise in internal temperature. Turn off the power, wait for the set to fully
cool down, then turn the power back on.
74
0
Core wires of two speakers are touching each other or a core wire is sticking out of the terminal and
touching the set’s rear panel, activating the protection circuit. First unplug the power cord, then twist the
core wires tightly or terminate the speaker cables, then reconnect.
74
Contents Connections Playback Settings Tips Appendix
60
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
