EasyManua.ls Logo

Denso DST-I - Usage, Storage, and Maintenance; Product Usage Restrictions and Storage

Denso DST-I
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For safe usage
- iv -
The product shall be disposed in accordance with all applicable legislation for disposal of Electrical and Electronic
Equipment in each country and region. (e.g. WEEE Directive in EU)
Please contact our authorized distributor or our sales agent when disposing it.
CAUTION
Do not apply the load causing stress to the connector connected to this product.
Applying too much force could result in breaking the connector terminal and this may cause malfunctioning
of the vehicle, the PC and/or this product.
Do not insert anything other than an SD memory card in the SD memory card slot on this product.
(Caution for the models with LCD)
Do not turn the power of this product OFF or remove the SD memory card while the SD memory
card indicator is flashing. (Caution for the models with LCD)
Failure to do so results in failure of the SD memory card or loss of the data in it.
Do not pull out an SD memory card when power is on. (Caution for the models with LCD)
<Usage restrictions>
Do not use a datalink cable other than the dedicated datalink cable supplied with this product.
When you start this product only by USB power (BUS power), be careful not to set the PC to "low
power consumption mode" / "suspend mode".
The USB port to be connected to this product requires a power supply capability of 500 mA
current source.
As for connecting this product to the PC, directly connect it to the USB port on the PC or via a
USB hub that has the capability of supplying sufficient current.
Some types of USB hubs may have insufficient power supply capability for normal operation. (For
example, a hub on PC keyboard is not suitable for this connection.)
<Storage and maintenance of the product>
Do not expose this product to direct sunlight for long periods of time.
The backlight of the LCD may be deteriorated and its luminance could be reduced consequently
in a high humid environment. (Caution for the models with LCD)
Use and store this product in a dry environment.
Do not use solvents or thinners such as benzine when cleaning.
To do so could cause deformation, discoloration, cracking, etc., and also result in loss of functions. To
clean, wipe gently with a soft damp cloth with diluted neutral detergent.
<Disposal of the product>
When discarding the product or its accessories, contact authorized industrial waste-disposal
service.
Those who discard waste without authorization will be punished by law.
Disposal Requirements

Related product manuals