N
Nicholas WilsonAug 3, 2025
What to do if the curing lamp does not operate on my DENTSPLY Triad 2000?
- AAnthony JacksonAug 3, 2025
If the curing lamp on your DENTSPLY Medical Equipment does not operate, several factors could be at play. First, the lamp itself might be burned out and require replacement. Second, ensure that the curing chamber access door is completely closed and that the access door interlock switch is functioning correctly. Listen for a snap when closing the door; if there's no sound, adjust the mounting bracket or replace the switch if it's faulty. Additionally, the timer module or the CURE switch might be faulty, requiring replacement. Check the continuity of the CURE switch and replace it if necessary.