Need help?Do you have a question about the Denver Instrument P-314 and is the answer not in the manual?
General| Capacity | 310 g |
|---|---|
| Calibration | External |
| Interface | RS232 |
| Power Supply | AC Adapter |
| Type | Precision Balance |
Unit contains no user serviceable parts; opening housing voids warranty.
Steps to connect the balance to AC power and recommendations for continuous connection.
Detailed steps for leveling the balance using adjustable feet for optimal weighing accuracy.
Step-by-step guide on how to tare the balance to zero out the weight of a container.
Describes the fine-dynamic dual-range feature for varying readability levels.
Lists recommended calibration weights and classes for different balance models.
Detailed steps for performing an external calibration using a weight.
Steps for performing internal calibration on PI Series balances.
Instructions on how to enter the counting mode and select a reference quantity.
Steps to follow after entering count mode to perform the counting operation.
Steps to enter the target/percent weighing mode and set the target weight.
Instructions on setting upper and lower limits for check weighing to get 'OK', 'HIGH', or 'LOW' responses.
Steps to enter the formulation mode to weigh multiple components.
How to start a formulation by adding components and storing measurements.
Steps to enter animal weighing mode and select start parameters and averaging points.
How to start weighing animals, including manual and automatic modes, and when the reading is locked.
Steps to enter statistics mode to enable data storage and calculation.
Steps for installing the USB application from the provided CD or website.
Guidance on connecting the balance to the computer and running the application.
How to adjust filter settings (low, normal, high) for optimized weighing in different environments.
How to adjust the stability icon sensitivity to different levels (Fine, Normal, Coarse).
Steps to set a password to prevent access to the menu and calibration.
Information on RS232 port communication, including baud rate and parity settings.
How to enable or disable internal calibration on PI Series balances.
Steps to restore all balance settings to their factory default values.
Policy stating that repair work must be performed by qualified factory-trained personnel.
Step-by-step instructions for safely cleaning the balance, including precautions and recommendations.
To Next Page
