Denver Instrument P-4002 User Manual

Pinnacle Series
Operation Manual
TARE
U
ser: J. S
m
ith
g
Weigh
P
-1
1
4
M
a
x
1
2
0
g
d
=
0
.1
m
g
1
1
-0
3
-0
1
1
2
:0
0
:0
0
3
.5
2
7
8
1
o
z
100.0127
602631.1 Rev. A

Denver Instrument P-4002 Specifications

General

Brand	Denver Instrument
Model	P-4002
Category	Accessories
Language	English

Summary

Warnings and Safety Information

Getting Started

Installation Instructions

Pan Assembly

Connecting to AC Power

Steps to connect the balance to the AC power source.

Leveling Your Balance

Guide on how to properly level the balance for accurate measurements.

Operation

Taring the Balance

Step-by-step guide on how to tare the balance before weighing.

Simple Weighing

Procedure for performing basic weighing operations on the balance.

Units

Selecting Weigh Units

Calibration

Recommended Calibration Weight and Class

Lists recommended calibration weights and their required classes for different models.

External Calibration Procedure

Step-by-step guide for performing external calibration using a weight.

Internal Calibration Procedure

Step-by-step guide for performing internal calibration on PI Series models.

Counting Mode

Entering Count Mode

Steps to enter and configure the counting mode.

Beginning to Count

Instructions on how to start and perform a count operation.

Changing Reference Weight or Quantity

Setting Custom Reference Quantity

Target/Percent Weighing Mode

Entering Target Mode

Steps to enter and set up the target or percent weighing mode.

Check Weighing Mode

Setting Target High and Low Limits

How to set upper and lower limits for check weighing.

Formulation

Entering Formulation Mode

Steps to enter and configure the formulation mode.

Beginning a Formulation

Instructions for starting and performing a formulation weighing.

Animal Weighing

Entering Animal Weighing Mode

Steps to enter and configure the animal weighing mode.

Adjusting Start Setting and Averaging

Statistics

Entering Statistics Mode

Steps to enter and enable the statistics data logging.

Storing Data Points

Printing Data Log

Displaying and Printing Statistics

GLP/ISO

Setting User Identification

Setting the Date

Setting the Time

Setting the Sample ID

Setting the Sample Number

Print

Setting Print Mode

Setting Format Type

USB

Installing the USB Application

Steps for installing the balance's USB application.

Environmental Settings

Adjusting Filter Settings

Setting the Stability Icon

Auto Zero Function

System

Security and Password

Internal Calibration (PI-Series)

Restore Factory Defaults

Cleaning and Maintenance

Cleaning

Instructions and precautions for cleaning the balance.

Troubleshooting

Serial Commands for Serial Input