Need help?Do you have a question about the Denver Instrument P-4002D and is the answer not in the manual?
General| Capacity | 4000 g |
|---|---|
| Readability | 0.01 g |
| Linearity | ±0.02 g |
| Interface | RS232 |
| Display | LCD |
| Type | Precision Balance |
| Repeatability | 0.01 g |
| Calibration | External |
| Operating Temperature | 10°C to 40°C |
| Weighing Units | g, oz, ozt, dwt, ct, gn, tl, tola |
| Operating Humidity | 10% to 85% RH (non-condensing) |
Initial setup, unpacking, and component verification for the balance.
Guidelines for selecting an optimal location and setting up the balance.
Instructions for connecting the AC adapter and leveling the balance for accurate use.
Guide to balance warm-up time for accuracy and the taring process.
Step-by-step instructions for performing basic weight measurements.
Procedures for selecting weigh units and performing balance calibration.
Details on Counting, Target/Percent, Check Weighing, Formulation, and Animal Weighing modes.
Using statistical functions and configuring GLP/ISO parameters for reporting.
Configuring print modes, formats, and utilizing the USB interface for data transfer.
Adjusting filter, stability, auto zero, and system settings for optimal performance.
Configuring standby mode for energy saving and restoring factory default settings.
List of optional accessories available for the Denver Instrument Pinnacle Series balance.
Procedures for cleaning the balance and performing essential safety checks.
Solutions for common error messages and operational issues encountered with the balance.
Commands used to control balance functions and operations via the serial interface.
Instructions for product registration, obtaining service, and warranty coverage.
To Next Page
