ENG-5
Prune
Some DAB services may stop broadcasting or you may not be able to receive a
station. Prune stations will delete the DAB stations from your station list that can
no longer be received.
System
The following settings are available:
○ Equaliser
○ Time
○ Backlight
○ Language
○ Factory Reset
○ SW version
● Equaliser
Adjust the sound of the music suits you best. There are already presets of EQ
and you can also tailor your prefer style using the “My EQ…”.
● Time
There are settings as follow:
1. Set Time/Date: This allows the user to manually set the current Time and
Date.
2. Auto Update: This function will set the radio’s time and date automatically with
data sent along with the broadcast of either the DAB or FM radio station.
* Note that FM auto Time/Date update may not work in your area, so the DAB
auto update option is recommended.
3. Set 12/4 Hour: This option will change the format of your clock to either 12
hour or 24 hour format.
4. Set Date Format: Changes the date display format between DD-MM-
YYYY/MM-DD-YYYY.
● Backlight
Your radio has 3 backlight settings:
Timeout:
This option is used to set the period of time that you wish your display’s backlight
to remain lit when your radio is in both ON and STANDBY modes. The available
options are: On/10 sec/20 sec/30 sec/45 sec/60 sec/90 sec/120 sec/180 sec.
Selecting “On” will force your radio’s backlight to remain on constantly. If you
select a specific time delay, after the selected time period has lapsed the display
will dim down under the following two situations:
- When the radio is turned on and no operation under selected time out period.
- When the radio turns off into standby mode, the backlight will dim down after
the time out period has lapsed.
On level:
This option will determine how bright the display’s backlight is lit while the radio
is on ON mode. There are 3 options for this setting: High, Medium& Low.
To Next Page
Loading...